LARGE SCALE GAS HARDWARE - Sly Cat Racing
Main menu:
| ZENOAH ENGINES AND SPARE PARTS ARE IN STOCK - CHECK OUT THE NEW ZENOAH PAGE | ||
| RUDDERS | ||
 |  | |
| 2" offset one piece transom hardware (SCR-001) $75 (CDN) | 2-1/2" offset one piece transom hardware (SCR-002) $75 (CDN) | |
 |  | |
low offset rudder assembly (SCR-003) $33 (CDN) | 3-3/4" offset dual pickup rudder assembly (SCR-004) $35 (CDN) | |
 |  | |
3-3/4" offset single pickup rudder assembly (SCR-005) $26 (CDN) | 5-3/4" offset rudder assembly (SCR-006) $39 (CDN) | |
 | ||
rudder pivot block for straight blade rudder (SCR-007) $10 (CDN) | ||
 |  | |
Speedmaster SPDR-011-60SB (SCR-011) $72 (CDN) | Speedmaster SPDR-011A-60SB (SCR-012) $78 (CDN) | |
 |  | |
Speedmaster SPDR-012-DUSB (SCR-013) $78 (CDN) | Speedmaster SPDR-011-60 BLD (SCR-014) $35 (CDN) | |
 |  | |
Speedmaster SPDR-011-60 DUAL BLD (SCR-015) $40 (CDN) | Speedmaster SPDR-012 DUAL BLD (SCR-127) $40 (CDN) | |
 |  | |
Speedmaster SPDR-012 DU-4 4" extended dual rudder (SCR-128) $88 (CDN) | Speedmaster SPDR-018-DA dual rudder control horn (SCR-129) $25 (CDN) | |
 | | |
Speedmaster SPDR-018-L dual rudder control horn (SCR-243) $18 (CDN) | Speedmaster SPDR-018-R dual rudder control horn (SCR-244) $18 (CDN) | |
 |  | |
Speedmaster SPDR-011A-60-6 6" extended dual tapered rudder (SCR-139) $95 (CDN) | 2-1/2" offset one piece hardware mounting block (SCR-080) $35 (CDN) | |
 |  | |
1-1/2" wide dual pickup Sly Cat Racing rudder 7075 aluminum fits Speedmaster hardware (SCR-122) $34 (CDN) | XL tapered dual pickup Sly Cat Racing rudder 7075 aluminum fits Speedmaster hardware (SCR-166) $47 (CDN) | |
 |  | |
1-1/2" wide, thin SAW Sly Cat Racing rudder 7075 aluminum fits Speedmaster hardware (SCR-241) $34 (CDN) | wide tapered dual pickup Sly Cat Racing rudder 7075 aluminum fits Speedmaster hardware (SCR-149) $34 (CDN) | |
 |  | |
pivot block to mount SPEEDMASTER or Sly Cat Racing rudder to budget rudder bracket (LH) (SCR-151) $8.50 (CDN) | pivot block to mount SPEEDMASTER or Sly Cat Racing rudder to budget rudder bracket (RH) (SCR-152) $8.50 (CDN) | |
 |  | |
| SPEEDMASTER SPDR-017-6 (SCR-181) $34 (CDN) | SPEEDMASTER SPDR-010-TB (SCR-188) $12 (CDN) | |
| STRUTS | ||
 |  | |
Speedmaster SPDSD-G250 Gas stinger for mono (SCR-189) $96 (CDN) | TFL stinger for mono (SCR-117) $65 (CDN) | |
 |  | |
| adjustable stinger for mono (SCR-016) $43 (CDN) | extended strut assembly (SCR-017) $24 (CDN) | |
 |  | |
Speedmaster SPDSD-6090 stinger for mono (SCR-140) $64 (CDN) | Speedmaster SPDS-010-250MR XTD exteded strut for mono (SCR-137) $48 (CDN) | |
 |  | |
Speedmaster SPDSD2-G250 stinger assembly with square drive and flex cable for mono (SCR-206) $240 (CDN) | Speedmaster SPDS-010-250HF (SCR-186) $48 (CDN) | |
 |  | |
strut assembly 50mm x 100mm (SCR-160) $23 (CDN) | Speedmaster SPDS-011-250F flat bottom cat strut (SCR-208) $48 (CDN) | |
 |  | |
Speedmaster SPDSB-011-250R (SCR-185) $32 (CDN) | Speedmaster SPDS-011-250R round bottom cat strut (SCR-184) $48 (CDN) | |
 |  | |
| skeg strut assembly (SCR-018) $30 (CDN) | large offset strut bracket set for mono (SCR-019) $12 (CDN) | |
 |  | |
| Speedmaster SPDS-008-250HF (SCR-020) $41 (CDN) | Speedmaster SPDS-008-250HR (SCR-021) $41 (CDN) | |
 |  | |
Speedmaster SPDS-010-250HR (SCR-022) $48 (CDN) | Speedmaster SPDS-014-BSF 250 Strut Bushing (SCR-130) $9 (CDN) | |
 |  | |
Speedmaster SPDSD-250 stinger drive bushing Bushing (SCR-131) $9 (CDN) | Speedmaster SPDS-013-SK (SCR-187) $56 (CDN) | |
| TURN FINS AND TRIM TABS | ||
 |  | |
2" x 3" trim tabs (SCR-023) $22 (CDN) | Speedmaster SPDT-150 trim tabs (SCR-024) $40 (CDN) | |
 |  | |
| 48mm x 57mm trim tabs (SCR-065) $25 (CDN) | 57mm x 48mm trim tabs (SCR-064) $18 (CDN) | |
 |  | |
Speedmaster SPDT-502 billet trim tabs (SCR-195) $85 (CDN) | Speedmaster SPDT-504S trim tabs (SCR-196) $129 (CDN) | |
 |  | |
Speedmaster SPDT-503 billet trim tabs (SCR-204) $105 (CDN) | 50mm x 40mm billet trim tabs (SCR-233) $45 (CDN) | |
 |  | |
50mm x 30mm billet trim tabs (SCR-148) $34 (CDN) | Speedmaster SPDT-200 trim tabs (SCR-197) $35 (CDN) | |
 |  | |
| Speedmaster SPDTF-100-SM small turn fin (SCR-138) $18 (CDN) | Speedmaster SPDTF-100-XLM large turn fin (SCR-141) $31 (CDN) | |
 | ||
72mm mono turn fin set (SCR-240) $24 (CDN) | ||
 |  | |
| 90mm mono turn fin set (SCR-025) $25 (CDN) | Speedmaster SPDTF-100-LM large turn fin (SCR-142) $18 (CDN) | |
| ENGINE AND DRIVELINE ACCESSORIES | ||
 | ||
electrtic fuel pump (SCR-235) $60 (CDN) | ||
 |  | |
| tygon fuel tubing (SCR-026) $2.25/FT (CDN) | 1/4" Speedmaster flex shaft - 36" length DISCONTINUED | |
 | | |
| 1/4" speedmaster flex shaft - 30" length DISCONTINUED | 1/4" speedmaster flex shaft - 24" length DISCONTINUED | |
 |  | |
| Sly Cat Racing 1/4" Flex Shaft - 36" length (SCR-126) $40 (CDN) | Sly Cat Racing 1/4" Flex Shaft - 30" length (SCR-214) $35 (CDN) | |
|  | |
Sly Cat Racing 1/4" Flex Shaft - 24" length (SCR-125) $30 (CDN) | coil relocator (SCR-032) $11 (CDN) | |
 | ||
Sly Cat Racing coil relocator (SCR-313) $15 (CDN) | ||
 |  | |
SPDZC-001 round collet for 1/4" flex shaft (SCR-207) $45 (CDN) | round super collet with pulley for 1/4" flex shaft (SCR-213) $26 (CDN) | |
 |  | |
| round super collet for 1/4" flex shaft (SCR-030) $16 (CDN) | round collet for 1/4" flex shaft shorter length than SCR-030 (SCR-226) $16 (CDN) | |
 |  | |
square drive super collet for 1/4" flex shaft (SCR-236) $16 (CDN) | insert - super collet for 1/4" flex shaft (SCR-237) $8 (CDN) | |
 |  | |
clutch assembly with round collet for zenoah (SCR-227) $45 (CDN) | water pump for use with clutch (SCR-234) $22 (CDN) | |
 |  | |
carburetor needle clamp (SCR-228) $5 (CDN) | fuel line clamp (SCR-229) $2.50 / pair (CDN) | |
 |  | |
stainless steel drive dog (SCR-146) $3 (CDN) | shaft saver (SCR-164) $5 (CDN) | |
 Can be assembled as standard mounts (isolator spacing matches gizmo mounts) or as drop mounts |  Can be assembled as standard mounts (isolator spacing matches gizmo mounts) or as drop mounts | |
Sly Cat Racing G260/300PUM engine mount with isolators (SCR-033) $65 (CDN) Without Isolators (SCR-033A) $50 (CDN) | Sly Cat Racing G320PUM engine mount with isolators (SCR-325) $65 (CDN) Without Isolators (SCR-325A) $50 (CDN) | |
 |  | |
| soft rubber isolator for engine mounts (SCR-034) $3.50 each / $12 for 4 (CDN) | Speedmaster engine mount for zenoah (SCR-035) includes mount, coil relocator, and throttle linkage $120 (CDN) | |
 |  | |
budget engine mount set for zenoah (SCR-174) $35 (CDN) | rubber isolators for budget engine mount (SCR-163) $16 (CDN) | |
 |  | |
Speedmaster engine mount for G320PUM zenoah (SCR-162) includes mount and throttle linkage $105 (CDN) | Stainless carburetor shaft (SCR-205) $5 (CDN) | |
 |  | |
aluminum iso block for zenoah (SCR-119) $20 (CDN) | iso block gaskets for zenoah (SCR-120) $5 (CDN) | |
 |  | |
flipper throttle linkage zenoah (SCR-159) $15 (CDN) | carburetor lever arm with rotating post sleeve (SCR-158) $5 (CDN) | |
 |  | |
| Speedmaster positive throttle linkage SPDZT-001 (SCR-036) $25 (CDN) | SPDM-001-RCMK Speedmaster engine mount for RCMK (SCR-203) $110(CDN) | |
 |  | |
Sly Cat Racing adjustable T-Bar with oiler fitting (SCR-306) $22 (CDN) | SPDTB-200 DELUXE T-BAR with oiler (SCR-198) $80 (CDN) | |
 |  | |
small oiler reservoir (SCR-110) $15 (CDN) | medium oiler reservoir (SCR-124) $15 (CDN) | |
 |  | |
| stuffing tube clamp with oiler fitting (SCR-113) $7 (CDN) | aluminum bulkhead grommets (SCR-109) $4/pair (CDN) | |
 |  | |
6.8mm aluminum bulkhead grommets (SCR-165) $4/pair (CDN) | 5mm aluminum T (SCR-147) $6 (CDN) | |
 |  | |
aluminum bellcrank (SCR-242) $6 (CDN) | 5mm aluminum Y (SCR-225) $6 (CDN) | |
 |  | |
| 6mm bulkhead fitting (SCR-038) $4 each (CDN) | 8mm bulkhead fitting (SCR-039) $5 each (CDN) | |
 |  | |
| 6mm water outlet (SCR-040) $3 each / $5 pair (CDN) | 8mm water outlet (SCR-041) $3.50 each / $6 pair (CDN) | |
 |  | |
prop blast water pickup (SCR-153) $14 (CDN) | aluminum transom exhaust outlet (SCR-043) $8 (CDN) | |
 |  | |
5mm ID high temp. silicone water line BLUE (SCR-031) $1.50/FT (CDN) | 4mm ID high temp. silicone water line BLACK (SCR-042) $1.50/FT (CDN) | |
 |  | |
aluminum transom outlet for exhaust or water drain hole (SCR-239) $5 (CDN) | aluminum fuel filler door assembly - threaded closure use with hard fuel tank (SCR-238) $20 (CDN) | |
 |  | |
aluminum fuel filler door assembly - magnetic closure use with hard fuel tank (SCR-224) $20 (CDN) | 1" stainlesss header - 90 degree (SCR-098) $20 (CDN) | |
 | | |
1" stainlesss header - 100 degree (SCR-099) $20 (CDN) | 1" stainlesss header - 105 degree (SCR-100) $20 (CDN) | |
 |  | |
1" stainlesss header - 90 degree 2" offset (SCR-167) $20 (CDN) | 1" stainlesss header - 90 degree 3" offset (SCR-168) $20 (CDN) | |
 |  | |
1" stainlesss header - drop header (SCR-169) $22 (CDN) | 1" no leak flange for zenoah (SCR-108) $30 (CDN) | |
 | | |
7/8" Sly Cat Racing tuned pipe with internal stinger (SCR-307) $110 (CDN) | 1" Sly Cat Racing tuned pipe with internal stinger (SCR-308) $110 (CDN) | |
 | | |
7/8" Sly Cat Racing tuned pipe with muffler combo (internal stinger) $135 (CDN) | 1" Sly Cat Racing tuned pipe with muffler combo (internal stinger) $135 (CDN) | |
 | ||
Muffler for Sly Cat Racing tuned pipes (for use with or without internal stinger) (SCR-310) $30 (CDN) | ||
 |  | |
1" stainlesss tuned pipe (SCR-172) $110 (CDN) | 7/8" Zippkits V3 tuned pipe (SCR-216) $115 (CDN) | |
 | | |
1" stainless pipe clamp (SCR-217) $7.50 (CDN) | 7/8" stainless pipe clamp (SCR-218) $7.50 (CDN) | |
 |  | |
7/8" stainlesss header - 90 degree (SCR-101) $20 (CDN) | 7/8" stainlesss header - 2" offset 90 degree (SCR-103) $20 (CDN) | |
 |  | |
7/8" stainlesss header - 3" offset 90 degree (SCR-104) $20 (CDN) | 7/8" stainlesss header - 100 degree (SCR-105) $20 (CDN) | |
 |  | |
7/8" stainlesss header - 105 degree (SCR-106) $20 (CDN) | 7/8" stainlesss header - drop header (SCR-107) $22 (CDN) | |
 |  | |
| 7/8" no leak flange for zenoah (SCR-044) $22 (CDN) | aluminum exhaust bracket with vibration damper (SCR-045) $15 (CDN) | |
 |  | |
SPDPM-004-LH large hydro pipe mount kit (SCR-191) $24 (CDN) | SPDPM-004-LM large mono pipe mount kit (SCR-192) $35 (CDN) | |
 |  | |
7/8" no leak flange for zenoah (SCR-170) $22 (CDN) | fuel line plug (SCR-173) $4 (CDN) | |
 |  | |
| TFL belt starter motor (SCR-094) $140 (CDN) | flywheel belt starter pulley for zenoah (SCR-092) $19 (CDN) | |
 |  | |
deluxe flywheel belt starter pulley for zenoah (SCR-246) $25 (CDN) | Speedmaster Starter Handle SPDSH-023 (SCR-133) $84 (CDN) | |
 | | |
Sly Cat Racing 350ml Fuel Bag (SCR-304) $4 (CDN) | Sly Cat Racing 500ml Fuel Bag (SCR-305) $4 (CDN) | |
 |  | |
Speedmaster 14" starter belt SPD-214 (SCR-209) $9 (CDN) | Speedmaster 17" starter belt SPD-217 (SCR-210) $11 (CDN) | |
|  | |
Speedmaster 19" starter belt SPD-217 (SCR-211) $13 (CDN) | starter belt (SCR-093) $12 (CDN) | |
 | ||
6mm 90 degree water fitting (SCR-087) $7.50/pair (CDN) | ||
 |  | |
4mm 90 degree water fitting (SCR-222) $7.50/pair (CDN) | 10-32 water fitting - fits speedmaster (SCR-223) $2 (CDN) | |
 |  | |
quick release fuel line Y fitting (SCR-132) $7 (CDN) | water line Y fitting (SCR-116) $2.75 (CDN) | |
 |  | |
| Aluminum tuned pipe header clamp (SCR-114) $15 (CDN) | Exhaust gasket (SCR-200) $4 (CDN) | |
| RADIO BOX AND MISC. | ||
 | ||
waterproof switch (SCR-232) $3 (CDN) | ||
 |  | |
fibreglass radio box fits 5 inch rails (SCR-230) $18 (CDN) | radio box tapen (SCR-231) $3 (CDN) | |
 |  | |
| aluminum switch mount and switch (SCR-046) $13.50 (CDN) | radiobox seals with aluminum mounting hardware (SCR-047) $6/pair (CDN) | |
 |  | |
replacement switch - futaba style connector (SCR-121) $2.50 (CDN) | magnetic prop balancer (SCR-150) $24 (CDN) | |
 |  | |
linkage rod boots (SCR-115) $1.25/pair (CDN) | linkage rod boots - small (SCR-118) $1.25/pair (CDN) | |
 |  | |
servo connector safety retainer clip (SCR-135) $1.50/pair (CDN) | servo connector safety retainer clip (SCR-136) $1.50/pair (CDN) | |
 |  | |
pushrod connector for servo/rudder -2mm shaft (SCR-048) $3.50/pair (CDN) | pushrod connector for servo/rudder -1.5mm shaft (SCR-049) $3.50/pair (CDN) | |
 |  | |
pushrod connector for servo/rudder -3mm shaft (SCR-215) $3.50/pair (CDN) | pushrod and connector for servo/rudder (SCR-219) $8/pair (CDN) | |
 |  | |
| pushrod and aluminum linkage rod connector for servo/rudder (SCR-220) $8/pair (CDN) | pushrod and ball connector for servo/rudder (SCR-221) $8/pair (CDN) | |
 |  | |
| aluminum auto-bailer for cat/mono (SCR-050) $9 (CDN) | deluxe o-ring cowl tie down set (SCR-051) $12/pair (CDN) | |
 |  | |
spring hatch lock pin (SCR-091) $5 (CDN) | alumimum cowl lock (SCR-052) $12/pair (CDN) | |
 | ||
alumimum cowl lock (SCR-245) $15/pair (CDN) | ||
 |  | |
RCM V2 real time GPS Telemetry system (SCR-081) $120 (CDN) | magnetic RPM sensor for telemetry system (SCR-082) $15 (CDN) | |
 |  | |
brushless motor rpm sensor for telemetry system (SCR-083) $15 (CDN) | saddle style servo mount for standard size servo (SCR-079) $15 (CDN) | |
 |  | |
clamp style servo mount for standard size servo (SCR-077) $12 (CDN) | clamp style servo mount for quarter scale servo (SCR-078) $13 (CDN) | |
 |  | |
clamp style servo mount for min size servo (SCR-199) $10 (CDN) | 2 position servo mount for standard servos (SCR-175) $8 (CDN) | |
 |  | |
heavy duty aluminum servo arm for 23 tooth spline servo (SCR-088) $10 (CDN) | heavy duty aluminum servo arm for 24 tooth spline servo (SCR-089) $10 (CDN) | |
 |  | |
heavy duty aluminum servo arm for 25 tooth spline servo (SCR-090) $10 (CDN) TEMP OUT OF STOCK | antenna tube with cap (SCR-086) $1 (CDN) | |
 |  | |
aluminum antenna mount (SCR-085) $2.50 (CDN) | small aluminum hull vent (SCR-095) $7 (CDN) | |
 |  | |
medium aluminum hull vent (SCR-096) $7 (CDN) | large aluminum hull vent (SCR-097) $8 (CDN) | |
 |  | |
replacement o-ring for SCR-051 (SCR-161) $0.50 (CDN) | viton o-ring for 1" header (1/8" CS) (SCR-102) $1.25 (CDN) | |
 |  | |
viton o-ring for 7/8" header - thin (3/32" CS) (SCR-201) $1.25 (CDN) | viton o-ring for 7/8" header - thick (1/8" CS) (SCR-202) $1.25 (CDN) | |
 |  | |
aluminum bow hook (SCR-123) $10 (CDN) | aluminum launch handle (SCR-111) $15 (CDN) | |